Embers cause up to 90% of home & business ignitions during wildfire events*. An ember can travel ahead of the wildfire igniting spot fires, on or around the house or structure.

Spot fires are new ignitions, which can create further embers, radiant heat or direct flames.

Wildfire Defense Mesh is proven effective against embers, radiant heat and direct flame.

*IBHS Statement

WILDFIRE DEFENSE MESH IS CERTIFIED & COMPLIANT

EMBER ATTACK

RADIANT HEAT

DIRECT FLAME

Wildfire Defense Mesh is made of corrosion and rust resistant steel making it incredibly strong and durable. Designed and tested to withstand temperatures without melting or deteriorating. It is the only Mesh product that has been independently tested against the three thread of fire. Wildfire Defense Mesh meets the testing requirements of the California Building Code, Chapter 7A 706A.2**.

Play Video

Wildfire Defense Mesh tested under extreme wildfire conditions.  Catching, Hold and Release.

installation guide
testing results

Non - corrosive

Noncombustible

Class A Fire Rated

Woven Mesh - Higher Tensile

Memory Recognition
(Rolls Flat and self-supporting)

0.0657" Aperture

Sold in Rolls

Width 7.5", 24", 36", 49" & 60"

Easy to Handle

Measure, Cut, Mold and Install

** When vertically installed.

CREATING A DEFENSIBLE SPACE FOR OUR COMMUNITY

Our team Is working with local governments, companies, and communities
to reduce the risk and Impact of wildfires on homes and businesses.

Firewise

RESIDENTIAL
COMMUNITY

Fire Districts

COMMUNITY
CASE STUDY

State Fire
Councils

PREPAREDNESS
PASSIVE BARRIERS

Insurance Assessment & Businesses

QUANTITATIVE RISK REDUCTION
COMMERCIAL ASSETS

HOME HARDENING AND DEFENSIBLE SPACE FOR YOUR HOME

Hardening your home and creating defensible zones around your home can greatly reduce the risk of wildfire damage and improve the chances that your home will survive a wildfire event. Below is a guide on how homeowners and builders can reduce the risk of wildfire ignition and spread.

Wildfire Defense Mesh can be considered as your “last line of defense” against ember attack.

1

1

1
2

2

3

4

4

5

6
7

8
9

9

Applications

Roll Width

7.5"

36"

49"

60"

1.

Vents

7.5"

36"

49"

60"

2.

Enclosing Decks

7.5"

36"

49"

60"

3.

Gutter

7.5"

36"

49"

60"

4.

Screens for windows & doors

7.5"

36"

49"

60"

5.

Bird stop & gaps between walls & roof

7.5"

36"

49"

60"

6.

Weep holes, external inlets & outlets

7.5"

36"

49"

60"

7.

Eaves & soffits

7.5"

36"

49"

60"

8.

Roofs and gulley leaf guard

7.5"

36"

49"

60"

9.

Perimiter fence

7.5"

36"

49"

60"

When Fire or Emergency Authorities specify non corrosive, non-combustible 1/16” (1/8” or finer) mesh or screening, Wildfire Defense Mesh meets and exceeds those requirements.

Download Application Info

When Fire or Emergency Authorities specify non corrosive, non-combustible 1/16” (1/8” or finer) mesh or screening, Wildfire Defense Mesh meets and exceeds those requirements.

Links to reference material

0-5’ DEFENSIBLE SPACE & DECKING

Authorities recommend enclosing decks, patios, and subfloors with mesh or screening to prevent debris build-up that could ignite.

IBHS’ Wildfire Prepare Home Program conducted a demonstration to show the ignitability of a combustible vs non-combustible deck. The non-combustible side installed Wildfire Defense Mesh to enclose the deck within the 0-5’ non-combustible zone. After embers were generated, the wind tunnel began. The combustible side was under full ignition, while the non-combustible side did not ignite.

In California, Zone 0 – Ember Resistant Zone was introduced under Assembly Bill 3074 and required under Assembly Bill 38 which looks to create a non-combustible zone 5’ from a house or structure. After cleaning under and enclosing one’s deck, screening or enclosing your deck will assist with continuing to meet these defensible space requirements.

DOWNLOAD CASE STUDY

RESEARCH & DEVELOPMENT

Wildfire Defense Mesh continually performs independent testing to innovate its product.

Ember Shield

Radiant Heat Shield

Direct Flame Shield

download our testing results

PROJECTS ACROSS THE UNITED STATES

Previous
Next

Frequently Asked Questions

At Wildfire Defense Mesh, we get a lot of commonly asked questions about our range of products and their many applications.
This FAQ page lists those frequently asked questions. If your question is not answered here, please do not hesitate to contact us for help.

 

Edit Content

Australian Standards 3959 – Construction of Buildings in Bushfire Prone Areas and the different Wildland Urban Interface (WUI) Building Codes in the U.S., CA Building Code, IWUIC, NFPA, etc. are all based on similar research. Embers are 80-90% of the cause for building loss, followed by radiant heat and direct flame.

A homeowner cannot control the land and vegetation outside of their property boundary. Therefore, codes make us look to what we can control. As a building code generally take years to write and update, we now look to National and State Fire Authorities for Best Practice.

The current best practice are to develop layers of defense, being Home Hardening and creating Defensible Space to be part of your solution to protect your home and assets.

Edit Content

While many different local governments may have their iterations of wildfire codes or recommendations. These are likely derived from the three most widely implemented wildfire codes, being:

  • The International Code Council’s International Wildland Urban Interface Code (IWUIC),
  • The National Fire Protection Association’s Standard for Reducing Structure Ignition Hazards from Wildland Fire (Standard 1144), and
  • The California Building Code Chapter 7A — Materials and Construction Methods for Exterior Wildfire Exposure.
Edit Content
  • Stainless steel has a high melting point and the research states that the protection should be able to withstand 900+ degrees C where as aluminium Melts at 700 Degrees C
  • Stainless steel is non corrosive and low maintenance where as galvanised steel loses its non corrosive protection over time
  • Stainless steel is non combustible and will not increase your building fire load
  • Stainless steel can reflect Radiant heat resulting in a lower temperature on the non fire side. This lower temperature will reduce the likelihood of fire continuing beyond the barrier
Edit Content
  • When there is no fire situation:
    The Bushfire Mesh (woven mesh) allows airflow and will allow areas that get wet to dry out
  • When there is a Fire situation:
    The Bushfire Mesh (woven mesh) allows airflow and the mesh acts as a filter that “knocks out” embers as they are carried by the winds
  • Solid metal barriers deflect the wind up and over the fence leaving the ember in the wind allowing the ember to enter the defendable space
  • Solid fences require large footings as they are subject to the full force of the wind
  • Woven Mesh is strong and it keeps its shape
Edit Content
  • It is manufactured to ISO 9000 Quality Standards
  • It is strong and can keep animals and insects out of protected spaces
  • Available in black powder coated finish and blends into the environment
  • Provides a privacy feature when installed
  • Supplied with additional wires, top and bottom to make securing easy
  • Has been independently tested and passed Australian Standards and U.S. Standards
  • Meets the requirements per International Wildland Urbane Interface Code (2015)
  • Class A Fire Rated Product per UL 723 / ASTM E84
Edit Content

The Wildfire Defense Mesh house on the hompage is a great resources and tools to select the most appropriate width for your application. Before you install Wildfire Defense Mesh, you will need to consult and confirm with NFPA / Firewise, State or you Local Fire Authority home hardening guidelines or a Wildfire Home Assessment specialist

Remember Wildfire Defense Mesh is part of your wildfire solution for Home Hardening and Defensible Space.